Difference between revisions of "Clean on Mac OS X"

From Clean
Jump to navigationJump to search
(Update clean_mac_clm patch checksum →‎Downloading sources)
(Run the .abc generation process on a Linux 64-bit machine. Now, we can build the standard library and the linker. The rest is still TODO...)
Line 198: Line 198:
 
== Compiling the standard libraries ==
 
== Compiling the standard libraries ==
  
This section is largely TODO.
+
The current Clean bootstrap packages are for 32-bits systems. They contain ABC files that will only work for x86 builds, and not for the 64-bits builds we are doing. Therefore, we will need a 64 bit installation of Clean to generate the .abc files we need. The next Clean release will have a 64-bit boot package, so this won't be necessary anymore.
 +
 
 +
In this section, we will assume a 64 bit Linux installation. You can use the binary package on [[Download Clean]] to install this. Run this on a Linux machine: a Mac won't work!
 +
 
 +
Maybe someone will make a package with all the .abc files inside it, if the next Clean release takes too long...
 +
 
 +
=== Preparing the environment ===
 +
 
 +
Make sure the `clm` (from the binary package) on your Linux machine creates working Clean executables.
 +
 
 +
Unpack the bootstrap package. We will first remove all .abc files in it, then replace them with 64-bit .abc files.
 +
 
 +
<pre>
 +
linux:~$ mkdir boot; cd boot; wget http://clean.cs.ru.nl/download/Clean22/linux/Clean2.2_boot.tar.gz
 +
[...]
 +
linux:~/boot$ md5sum Clean2.2_boot.tar.gz
 +
860fb509a5127dee616cbf2a689277b1  Clean2.2_boot.tar.gz
 +
linux:~/boot$ tar -xzf Clean2.2_boot.tar.gz
 +
linux:~/boot$ cd boot/clean
 +
linux:~/boot/boot/clean$ cd clean/stdenv
 +
linux:~/boot/boot/clean/clean/stdenv$ rm Clean\ System\ Files/*.abc
 +
</pre>
 +
 
 +
=== Building the ABC files ===
  
 
<pre>
 
<pre>
~/clean$ cd stdenv/Clean\ System\ Files
+
linux:~/boot/boot/clean/clean/stdenv$ make stdenv
~/clean/stdenv/Clean System Files$ ../../exe/cg _system
+
clm -P . -ABC StdBool
~/clean/stdenv/Clean System Files$ file _system.obj
+
Compiling StdBool
_system.obj: ACB archive data
+
clm -P . -ABC StdChar
~/clean/stdenv/Clean System Files$
+
Compiling StdChar
 +
[....]
 +
clm -P . -ABC StdGeneric
 +
Compiling StdGeneric
 +
make: *** No rule to make target `Clean System Files/_system.abc', needed by `stdenv'.  Stop.
 +
</pre>
 +
 
 +
TODO: I need to find a fix for the above problem.
 +
 
 +
The standard environment objectfile we have just compiled is useless. It will only work on 64-bits Linux systems. However, in the process of creating this file, the build process created the intermediary Clean .abc files that we needed for our compilation. You should transfer these files back to your Mac so you can continue the build. For example, with scp after using "stitch" to build the 64 bit .abc files:
 +
 
 +
<pre>
 +
~/clean$ cd clean/stdenv
 +
~/clean/clean/stdenv$ rm Clean\ System\ Files/*.abc
 +
~/clean/clean/stdenv$ scp "stitch:boot/boot/clean/clean/stdenv/Clean\ System\ Files/*.abc" Clean\ System\ Files
 +
</pre>
 +
 
 +
Now that the .abc files are in place, we can continue the build:
 +
 
 +
<pre>
 +
~/clean/clean/stdenv$ make stdenv
 +
[...]
 
</pre>
 
</pre>
  
 
== Compiling the linker ==
 
== Compiling the linker ==
 +
 +
We are going to need the .abc files from Linux again, so log into it. Because the build references 'clms', which seems to be the same as 'clm' except for optimalization (?), we need to make sure 'clms' is in our PATH as an alias to clm. The steps below may be different for you.
  
 
<pre>
 
<pre>
~/clean$ patch -p0 <clean_mac_stdenvinclusion.patch
+
linux:~$ cd `dirname $(which clm)`
Patching file clean/src/Makefile
+
linux:~/clean/bin$ ln -s clm clms
~/clean$ cd clean/src
+
linux:~/clean/bin$ clms
~/clean/clean/src$ cp ../exe/cg tools/elf_linker
+
Usage: clm [options] module_name [-o application_name]
~/clean/clean/src$ make tools/elf_linker/linker
+
path options: -I path -IL library -P paths
 +
[...]
 +
linux:~/clean/bin$ cd
 +
linux:~$
 +
</pre>
 +
 
 +
Now that you have a working clm, continue the build.
 +
 
 +
<pre>
 +
linux:~$ cd boot/boot/clean/clean/src
 +
linux:~/boot/boot/clean/clean/src$ make tools/elf_linker/linker
 
cd tools/elf_linker; \
 
cd tools/elf_linker; \
 
../clm/clms -nr -nt -h 20m -s 2m -I ia32 -I ../../libraries/ArgEnvUnix -I ../../compiler/main/Unix -I ../../../stdenv linker -o linker; \
 
../clm/clms -nr -nt -h 20m -s 2m -I ia32 -I ../../libraries/ArgEnvUnix -I ../../compiler/main/Unix -I ../../../stdenv linker -o linker; \
 
cp linker ../../../exe/linker; \
 
cp linker ../../../exe/linker; \
 
../../../bin/clm -nr -nt -h 20m -s 2m -I ia32 -I ../../libraries/ArgEnvUnix -I ../../compiler/main/Unix linker -o linker
 
../../../bin/clm -nr -nt -h 20m -s 2m -I ia32 -I ../../libraries/ArgEnvUnix -I ../../compiler/main/Unix linker -o linker
Generating code for linker
+
Compiling linker
Generating code for ArgEnv
+
Warning [StdFile.abc,63,accFiles;34]: no inline code for this rule
Generating code for set_return_code
+
Warning [StdFile.abc,63,stdio;33]: no inline code for this rule
Generating code for elf_linker
+
Warning [linker,_match0]: function may fail
Generating code for StdClass
+
Compiling elf_linker
Generating code for StdString
+
[...]
B, C, F, I, P or R expected at line 255 (got
+
Generating code for elf_relocations
)
+
Generating code for elf_linker2
cp: linker: No such file or directory
+
Linking linker
Compiling StdInt
+
linux:~/boot/boot/clean/clean/src$
Can't find StdInt.icl
+
</pre>
make: *** [tools/elf_linker/linker] Error 1
+
 
 +
This linker is also useless, but the .abc files aren't! Copy the .abc files in "linux:~/boot/boot/clean/clean/src/tools/elf_linker/Clean System Files" to your Mac to continue. For example:
 +
 
 +
<pre>
 +
~/clean$ cd src/tools/elf_linker
 +
~/clean/src/tools/elf_linker$ scp "stitch:boot/boot/clean/clean/src/tools/elf_linker/Clean\ System\ Files/*.abc" Clean\ System\ Files
 +
~/clean/src/tools/elf_linker$ cd ../..
 +
~/clean/src$ make tools/elf_linker/linker
 +
[...]
 
</pre>
 
</pre>
  
And this is the error the [[Clean2.2 on 64bit Xubuntu]] ends with, too. Help from the list is required here.
+
The rest of this process is TODO
  
 
== Compiling cocl ==
 
== Compiling cocl ==

Revision as of 17:07, 13 December 2010

This page is a work-in-progress for building Clean on recent Mac OS X systems. There is an official build for Clean on Mac, but it's 32-bit PowerPC-based; a shame since the newest Macs are 64-bit Intel-based.

Another useful page for building Clean on recent Unices is the Clean2.2 on 64bit Xubuntu page.

This guide assumes basic knowledge of Terminal.app and the basics of UNIX. I am writing this during my fall 2010 Functional Programming course, using a MacBook Pro 2009 model running Mac OS X 10.6.4. You need to have XCode Tools installed before you begin. Please report back in the Discussion above what your results are.

Building the GNU assembler

Because XCode Tools contains an ancient version of the GNU assembler, we will start by building one ourselves. However, because `gas` does not seem to be able to write to 64-bit mach-o objectfiles at time of writing, we will build a version of gas that builds 64-bit ELF files, and we will convert them to Mach-O 64-bit (improvements to this process are very welcome). To start, download GNU binutils to your Downloads directory using your browser (or in your terminal if you have 'wget' or similar installed), then:

~$ mkdir /tmp/gas
~$ cd /tmp/gas
/tmp/gas$ mv ~/Downloads/binutils-2.20.1.tar.gz .
/tmp/gas$ tar -xzf binutils-2.20.1.tar.gz
/tmp/gas$ cd binutils-2.20.1/bfd
/tmp/gas/binutils-2.20.1/bfd$ ./configure --prefix="$HOME" --target="x86_64-apple-elf"
[...]
config.status: executing default commands
/tmp/gas/binutils-2.20.1/bfd$ make
[...]
touch stamp-lib
/tmp/gas/binutils-2.20.1/bfd$ cd ../opcodes
/tmp/gas/binutils-2.20.1/opcodes$ ./configure --prefix="$HOME" --target="x86_64-apple-elf"
[...]
config.status: creating po/Makefile
/tmp/gas/binutils-2.20.1/opcodes$ make libopcodes.la
[...]
/tmp/gas/binutils-2.20.1/opcodes$ cd ../libiberty
/tmp/gas/binutils-2.20.1/libiberty$ ./configure --prefix="$HOME"
[...]
/tmp/gas/binutils-2.20.1/libiberty$ make libiberty.a
[...]
else true; fi
/tmp/gas/binutils-2.20.1/libiberty$ cd ../gas
/tmp/gas/binutils-2.20.1/gas$ ./configure --prefix="$HOME" --target="x86_64-apple-elf"
[...]
config.status: executing default commands
/tmp/gas/binutils-2.20.1/gas$ make
[...]
/tmp/gas/binutils-2.20.1/gas$ make install
[...]
/tmp/gas/binutils-2.20.1/gas$ ~/bin/x86_64-apple-elf-as --version
[...]
This assembler was configured for a target of `x86_64-apple-elf'.
/tmp/gas/binutils-2.20.1/gas$ cd /tmp
/tmp$

We are ready to assemble to ELF. Now, to be able to assemble to Mach-O, our native format, we need objconv, a tool by Agner Fog. Download objconv.zip to your Downloads folder, then:

/tmp$ mkdir objconv && cd objconv
/tmp/objconv$ mv ~/Downloads/objconv.zip .
/tmp/objconv$ unzip objconv.zip
Archive:  objconv.zip
  inflating: objconv.exe             
  inflating: objconv-instructions.pdf  
 extracting: source.zip              
 extracting: extras.zip   
/tmp/objconv$ unzip source.zip
Archive: source.zip
[...]
 inflating: build.sh
/tmp/objconv$ g++ -o objconv -O2 *.cpp
[...]
/tmp/objconv$ file objconv
objconv: Mach-O 64 bit executable x86_64
/tmp/objconv$ cp objconv ~/bin/
/tmp/objconv$ cd /tmp
/tmp$

If you want, you can clean up your binutils and objconv build dirs, or it will happen automatically at next boot.

/tmp$ rm -rf gas
/tmp$ rm -rf objconv

Now we can finally assemble Intel gas x86-64 assembly files to 64-bit Mach-O files!

Downloading sources

Because a part of Clean is written in Clean, we need to take a 'bootstrap' package to build. This package contains some 'precompiled' Clean source (no machine-dependent object code, however). You can get it from the Download page (direct link).

Of course, the way of downloading and the place to download is up to you. I use wget and download to $HOME/clean.

~$ mkdir clean
~$ cd clean
~/clean$ wget http://clean.cs.ru.nl/download/Clean22/linux/Clean2.2_boot.tar.gz
[...]
2010-09-05 14:10:41 (429 KB/s) - '`Clean2.2_boot.tar.gz'' opgeslagen [5651786/5651786]

And unpack it...

~/clean$ tar -xzf Clean2.2_boot.tar.gz

Download some of my patches, which will hopefully be merged (after which this guide will be updated):

~/clean$ wget http://files.dazjorz.com/clean/clean_mac_runtimesystem.patch
~/clean$ wget http://files.dazjorz.com/clean/clean_mac_codegenerator.patch
~/clean$ wget http://files.dazjorz.com/clean/clean_mac_stdenvinclusion.patch
~/clean$ wget http://files.dazjorz.com/clean/clean_mac_clm.patch
~/clean$ md5sum *.patch
7905de9c52f77ba3d68f424ab75871fe  clean_mac_clm.patch
4bc56357ef14e1016a2955a987535350  clean_mac_codegenerator.patch
d0c7a14afcfc02566c81e027e1a0c329  clean_mac_runtimesystem.patch
e8bf18f68d336ddf879c5c8e11eaec56  clean_mac_stdenvinclusion.patch

Building the RuntimeSystem

Because the standard Makefile assumes we are using Linux, we will build the RuntimeSystem ourselves.

~/clean$ patch -p0 <clean_mac_runtimesystem.patch 
patching file clean/src/RuntimeSystem/Makefile.macosx
patching file clean/src/RuntimeSystem/Makefileprofile.macosx
patching file clean/src/RuntimeSystem/afileIO3.asm
patching file clean/src/RuntimeSystem/afileIO3.s
patching file clean/src/RuntimeSystem/areals.s
patching file clean/src/RuntimeSystem/scon.c
patching file clean/src/RuntimeSystem/ufileIO2.c
~/clean$ cd clean/src/RuntimeSystem
~/clean/clean/src/RuntimeSystem$ make -f Makefile.macosx
[...]
~/clean/clean/src/RuntimeSystem$ file _startup.a astartup.o
_startup.a: current ar archive
astartup.o: Mach-O 64-bit object
~/clean/clean/src/RuntimeSystem$ make -f Makefile.macosx proper
[...]
~/clean/clean/src/RuntimeSystem$ cd ../../..
~/clean$

Building the Code Generator

The Clean Code Generator turns intermediate Clean files (.abc) into objectfiles (.o) or assembly files (.s).

~/clean$ patch -p0 <clean_mac_codegenerator.patch
patching file clean/src/CodeGenerator/Makefile.macosx
patching file clean/src/CodeGenerator/cg.c
patching file clean/src/CodeGenerator/cgaas.c
patching file clean/src/CodeGenerator/cgawas.c
patching file clean/src/CodeGenerator/cginput.c
patching file clean/src/CodeGenerator/cgport.h
~/clean$ cd clean/src/CodeGenerator
~/clean/clean/src/CodeGenerator$ make -f Makefile.macosx
[...]
gcc o/cg.o o/cginput.o o/cgcode.o o/cginstructions.o o/cgstack.o o/cgcalc.o o/cglin.o o/cgopt.o o/cgaas.o o/cgawas.o -arch x86_64 -framework Carbon -o cg
~/clean/clean/src/CodeGenerator$ make -f Makefile.macosx proper
rm o/cg.o o/cginput.o o/cgcode.o o/cginstructions.o o/cgstack.o o/cgcalc.o o/cglin.o o/cgopt.o o/cgaas.o o/cgawas.o
~/clean/clean/src/CodeGenerator$ file cg
cg: Mach-O 64-bit executable x86_64
~/clean/clean/src/CodeGenerator$ cd ..
~/clean/clean/src$ make ../exe/cg
cp CodeGenerator/cg ../exe/cg
~/clean/clean/src$ cd ../..
~/clean$

Compiling patch_bin, clm and clms

We need to install patch_bin correctly first, before compiling clms. Clm will be built automatically while building patch_bin.

~/clean$ patch -p0 <clean_mac_clm.patch
patching file clean/src/tools/clm/Makefile.macosx
patching file clean/src/tools/clm/clm.c
~/clean$ cd clean/src/tools/clm
~/clean/clean/src/tools/clm$ make -f Makefile.macosx
[...]
~/clean/clean/src/tools/clm$ file patch_bin clm
patch_bin: Mach-O 64-bit executable
clm:       Mach-O 64-bit executable
~/clean/clean/src/tools/clm$ make -f Makefile.macosx clms
[...]
~/clean/clean/src/tools/clm$ file clms
clms: Mach-O 64-bit executable
~/clean/clean/src/tools/clm$ cd ../..
~/clean/clean/src$ make ../bin/patch_bin
cp tools/clm/patch_bin ../bin/patch_bin
~/clean/clean/src$ make ../bin/clm
cp tools/clm/clm ../bin/clm
[...]
~/clean/clean/src$ cd ../..
~/clean$

Compiling the standard libraries

The current Clean bootstrap packages are for 32-bits systems. They contain ABC files that will only work for x86 builds, and not for the 64-bits builds we are doing. Therefore, we will need a 64 bit installation of Clean to generate the .abc files we need. The next Clean release will have a 64-bit boot package, so this won't be necessary anymore.

In this section, we will assume a 64 bit Linux installation. You can use the binary package on Download Clean to install this. Run this on a Linux machine: a Mac won't work!

Maybe someone will make a package with all the .abc files inside it, if the next Clean release takes too long...

Preparing the environment

Make sure the `clm` (from the binary package) on your Linux machine creates working Clean executables.

Unpack the bootstrap package. We will first remove all .abc files in it, then replace them with 64-bit .abc files.

linux:~$ mkdir boot; cd boot; wget http://clean.cs.ru.nl/download/Clean22/linux/Clean2.2_boot.tar.gz
[...]
linux:~/boot$ md5sum Clean2.2_boot.tar.gz
860fb509a5127dee616cbf2a689277b1  Clean2.2_boot.tar.gz
linux:~/boot$ tar -xzf Clean2.2_boot.tar.gz
linux:~/boot$ cd boot/clean
linux:~/boot/boot/clean$ cd clean/stdenv
linux:~/boot/boot/clean/clean/stdenv$ rm Clean\ System\ Files/*.abc

Building the ABC files

linux:~/boot/boot/clean/clean/stdenv$ make stdenv
clm -P . -ABC StdBool
Compiling StdBool
clm -P . -ABC StdChar
Compiling StdChar
[....]
clm -P . -ABC StdGeneric
Compiling StdGeneric
make: *** No rule to make target `Clean System Files/_system.abc', needed by `stdenv'.  Stop.

TODO: I need to find a fix for the above problem.

The standard environment objectfile we have just compiled is useless. It will only work on 64-bits Linux systems. However, in the process of creating this file, the build process created the intermediary Clean .abc files that we needed for our compilation. You should transfer these files back to your Mac so you can continue the build. For example, with scp after using "stitch" to build the 64 bit .abc files:

~/clean$ cd clean/stdenv
~/clean/clean/stdenv$ rm Clean\ System\ Files/*.abc
~/clean/clean/stdenv$ scp "stitch:boot/boot/clean/clean/stdenv/Clean\ System\ Files/*.abc" Clean\ System\ Files

Now that the .abc files are in place, we can continue the build:

~/clean/clean/stdenv$ make stdenv
[...]

Compiling the linker

We are going to need the .abc files from Linux again, so log into it. Because the build references 'clms', which seems to be the same as 'clm' except for optimalization (?), we need to make sure 'clms' is in our PATH as an alias to clm. The steps below may be different for you.

linux:~$ cd `dirname $(which clm)`
linux:~/clean/bin$ ln -s clm clms
linux:~/clean/bin$ clms
Usage: clm [options] module_name [-o application_name]
path options: -I path -IL library -P paths
[...]
linux:~/clean/bin$ cd
linux:~$

Now that you have a working clm, continue the build.

linux:~$ cd boot/boot/clean/clean/src
linux:~/boot/boot/clean/clean/src$ make tools/elf_linker/linker
cd tools/elf_linker; \
	../clm/clms -nr -nt -h 20m -s 2m -I ia32 -I ../../libraries/ArgEnvUnix -I ../../compiler/main/Unix -I ../../../stdenv linker -o linker; \
	cp linker ../../../exe/linker; \
	../../../bin/clm -nr -nt -h 20m -s 2m -I ia32 -I ../../libraries/ArgEnvUnix -I ../../compiler/main/Unix linker -o linker
Compiling linker
Warning [StdFile.abc,63,accFiles;34]: no inline code for this rule
Warning [StdFile.abc,63,stdio;33]: no inline code for this rule
Warning [linker,_match0]: function may fail
Compiling elf_linker
[...]
Generating code for elf_relocations
Generating code for elf_linker2
Linking linker
linux:~/boot/boot/clean/clean/src$

This linker is also useless, but the .abc files aren't! Copy the .abc files in "linux:~/boot/boot/clean/clean/src/tools/elf_linker/Clean System Files" to your Mac to continue. For example:

~/clean$ cd src/tools/elf_linker
~/clean/src/tools/elf_linker$ scp "stitch:boot/boot/clean/clean/src/tools/elf_linker/Clean\ System\ Files/*.abc" Clean\ System\ Files
~/clean/src/tools/elf_linker$ cd ../..
~/clean/src$ make tools/elf_linker/linker
[...]

The rest of this process is TODO

Compiling cocl

TODO

Compiling htoclean

TODO

Installing and wrapping up

TODO